Collection Bag - Grizzly G0583 Instruction Manual

Collection Bag

Components and Hardware Needed:
Clear Collection Bag ...........................................1
Lower Bag Clamp ...............................................1
Wide Foam Strip .................................................1
To install the collection bag:
1.
Secure the wide foam strip around the out-
side bottom rim of the collector and trim the
excess (Figure 12).
Wide Foam Strip
Figure 12. Installed and trimmed wide foam
2.
Slide the clear collection bag around the
bottom of the collector so the rim of the bag
overlaps onto the foam strip.
G0583 1 HP Canister Dust Collector
strip.
3.
Tighten the lower bag clamp around the wide
foam strip to seal and secure the lower col-
QTY
lection bag (Figure 13).
Figure 13. Dust collection bag installed.
-15-