Control Panel - Fisher M-Scope ID EDGE Operating Manual

CONTROL PANEL

The ID EDgE control panel is an all new digital I/O System. The LCD
Display provides you with a constant control readout showing you
all of your current settings.
1. The ON/OFF button turns the unit ON and OFF. One of the first
things you will notice when you turn on your ID Excel is the battery
level display. Fresh batteries will show 9 volts; when the battery
level is down to 6 volts, you have about an hour of battery life
left. The detector will not turn on if the search coil is not properly
connected. This can prove to be a timesaving safeguard. To turn
the unit OFF, push and hold the ON/OFF button.
2. The MENU button enables you to enter the "menu mode," in
which you can adjust the discrimination, volume and sensitivity
controls with the UP/DOWN arrow buttons. Notice that when the
MENU button is pushed, the active control blinks — this is the control
that can be adjusted with the UP or DOWN arrow buttons. To
move to the next control, just press the MENU button again. When
you have all your settings completed, press the Pinpoint button to
return to the search mode.
A. The DISCRIMINATION control can be varied from a setting
of -36 to +22 with the arrow buttons when the DISC icon is
flashing.
4