Configure Wpa, Wpa2, Or Wpa + Wpa2 - Verizon 4G LTE Broadband Router User Manual

Settings
Security None
Options
WEP
WPA-PSK (TKIP)
WPA2-PSK (AES)
WPA-PSK (TKIP) +
WPA2-PSK (AES)
3. Modify any desired Wi-Fi settings.
4. Click Apply.
5. Set up and test your Wi-Fi capable computer, smartphone or tablet to make sure that they
can connect wirelessly.
If you cannot connect wirelessly, check the following:
• You might be connected to a different router. Check your settings to see if they are set
to automatically connect to the first open network.
• You might not be connecting to the router because it is interfering with other wireless
computers, smartphones or tablets. To avoid this, try changing the channel.
For more information about available security options, see Configure WPA, WPA2, or WPA +
WPA2 on page 27. Otherwise, continue to Join Your Wireless Network on page 30.

Configure WPA, WPA2, or WPA + WPA2

Both Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) provide strong
data security.
• WPA with TKIP is a software implementation that can be used on Windows systems
with Service Pack 2 or later.
• WPA2 with AES is a hardware implementation.
Consult your computer, smartphone or tablet's documentation for instructions when changing
WPA settings.
Wi-Fi Protected Setup (WPS), or Push "N' Connect, implements WPA/WPA2 wireless
security on the router and your WPS-compatible wireless computer, smartphone or tablet at
the same time.
Plan Your Network and Configure Wireless Settings
Verizon 4G LTE Broadband Router
Description
Use this setting to establish wireless connectivity before setting up
wireless security.
Use encryption keys and data encryption for data security. You can
select 64 bit or 128-bit encryption. See
page 28.
Allow only computers configured with WPA to connect to your router.
Configure WPA, WPA2, or WPA + WPA2
See
Allow only computers configured with WPA2 to connect to your router.
Configure WPA, WPA2, or WPA + WPA2
See
Allow computers configured with either WPA-PSK or WPA2-PSK
security to connect to your router. See
or WPA + WPA2
27
Configure WEP
Configure WPA, WPA2,
on page 27.
on
on page 27.
on page 27.