Configure Your Internet Settings - Verizon 4G LTE Broadband Router User Manual

The following screen appears.
3. Enter the Wi-Fi Admin Password printed on your router's label.
4. Inthe Administrator login times out after idle for field, enter your desired number of
minutes after which the router signs out of the webpage.
5. Click Sign In.
To learn how to change the password, see Change the Default Password on page 45.
Note: If you forget your password, restore your router to its factory default
settings, which resets the password. See Factory Defaults on
page 96.

Configure Your Internet Settings

To connect to the Internet, you need an active broadband service account. The broadband
service can be 4G LTE from Verizon or WAN Ethernet (such as DSL or cable broadband)
from any internet service provider.
If WAN Ethernet service is required, contact your internet service provider for:
• Your user name
• Password
• Network name
You will also configure some or all of the settings described in the sections listed below:
• The default Internet connection mode is 4G LTE broadband on page 16 (only if you are
changing the Internet connection mode from mobile broadband to WAN Ethernet).
• 4G LTE Broadband Settings on page 16 (not required if you are using a WAN Ethernet
connection).
• WAN Ethernet Broadband Settings on page 18 (not required if you are using a 4G LTE
connection).
Verizon 4G LTE Broadband Router
Setting Up Your Router
15