Entry Delay; Alarm History; Exit Delay - NAPCO MAGNUM ALERT-725 Operating Manual

Alarm History:

Hold-down function (2). This will display
the last alarm condition on the ARMED/
MEMORY light.
Alarm Plan:
Identifies the areas of your premises protected
by each zone location and lists zone features.
To be filled in and explained by your alarm
specialist.
Arm:
To turn your system on.
Auto-Shunt Zone:
A zone that will automatically be bypassed if in
trouble when arming.
Burglary Zona:
A zone that will detect intrusion while the
system is armed.
Day Zone:
A zone that will cause visual and audible
(optional) indication at the keypad, if in trouble,
when the system is disarmed.
Disarm:
To turn your system off.
GLOSSARY

Entry Delay:

A delay that allows you time to enter your
premises after the system is armed without
setting off an immediate alarm.

Exit Delay:

A delay that allows you time to exit your
premises after the system is armed without
setting off an immediate alarm.
Exit/Entry Follower Zone:
A zone that will ignore detection during the
exit delay, and only during entry delay if the
Exit/Entry Zone is entered first. If the Exit/
Entry Zone is not entered first, the Exit/Entry
Follower Zone will go into alarm immediately.
Fsllback Code:
A preprogrammed 4-digit code that may be
used to arm or disarm your system should all
user codes be erased (as after an extended
power failure).
Group Shunt:
Removal of a preset group of zones from the
system by pressing Key (S) twice.
Hold-Down Functions:
Secondary keypad functions. Each is activated
by holding down a designated digit for 2
seconds until a beep sounds.
4