Table of Contents
Advertisement
Arming with Selective Zone Shunting
Your alarm specialist may have selected one
or more zones with the capability of being
selectively shunted (bypassed) from the
system. Since a shunted zone cannot cause an
alarm, you may wish to use this feature to turn
off the interior areas when arming, while keep
ing your perimeter zones (windows, doors,
etc.) active.
Check your Alarm Plan and note which zones
may be selectively shunted. To utilize the
selective-shunt feature, first check the green
STATUS light to make sure that all zones are
operating properly. Then press the Shunt
Button [S] followed by the number(s) of the
zone(s) to be bypassed. Thus, to bypass Zones
2 and 3, for example, press
[S] then [2] = Zone 2 shunted
[S] then [3] = Zone 3 shunted.
The yellow SHUNT light will come on when-
ever one or more zones are shunted. Enter
your user code to arm the remaining zones.
The green STATUS light will go off and the red
ARMED/MEMORY light will come on.
NOTE: When the panel is subsequently
disarmed, all shunted zones will automatically
revert back to active zones.
PROTECTING YOURSELF
WHILE YOU ARE ON PREMISES
Arming with Group Zone Shunting
Your alarm specialist may have also opted for
one or more interior zones to be "group
shunted", that is, bypassed all at the same
time. This group of zones is bypassed by
simply pressing Key [S] twice prior to arming.
The yellow SHUNT light will come on. Enter
your user code to arm the remaining zones.
The green STATUS light will go off and the red
ARMED/MEMORY light will come on. When
the panel is subsequently disarmed, all
shunted zones will automatically revert back
to active zones.
NOTE: The yellow SHUNT light will not come
on if zones are auto-shunted.
Arming with Instant Protection
Pressing Key [4] will cancel both the exit and
entry delays on the exit/entry zone upon
arming. Use this feature when at home (as
when retiring for the evening, for example) to
sound an instant alarm on intrusion through
the exit/entry door. To arm with instant protec-
tion, hold down Instant Alarm Key [S] until it
beeps, then enter your code to arm the panel.
(If Key [4] is pressed
entry
only
delay will be cancelled.) The red
ARMED/MEMORY light will flash rapidly to
remind you that you have armed with instant
1 2
after
the panel is armed,
Advertisement
Table of Contents
