Table of Contents
Advertisement
Step 6
Attach wooden handle halves to metal
bracket as shown. Fasten a handle on side
of cooking chamber above the side air
vent and another handle to outside of
smoker lid.
" Lock
Washer
Step 7
Close lid and carefully turn the smoker to
its upright position. Try to minimize the
stress placed on the legs.
CAUTION:
Keep lid closed when setting
smoker upright to prevent
bodily injury.
Step 8
Attach the third handle to other side of the
cooking chamber.
Step 9
Open the smoker lid and attach air vent
butterfly damper as illustrated. Do not
overtighten, as this will make the damper
hard to open and close.
Step 10
Attach the grill support brackets to inside
(front of cooking chamber) using
bolts and nuts as illustrated.
Step 11
Insert the two
" x 1
bolts into the pre-drilled holes provided in
the back of the cooking chamber and
secure with nuts.
Grill Support
Bracket
5
" x 1 " Bolt
Handle Half
10-24 Screws
" x 1 " Bolts
" x
"
" grill support
Grill Support
Bolt
Inside of Cooking
Chamber
Handle
Air Vent
Butterfly Damper
" Hex Nut
" Lock Washer
" Flat Washer
Advertisement
Table of Contents
