Advertisement
SAFETY RELATED SYMBOLS
CAUTION
RISK OF ELECTRIC SHOCK
This symbol, wherever used, alerts you to the pre-
sence of un-insulated and dangerous voltages with-
in the product enclosure. These are voltages that
may be sufficient to constitute the risk of electric
shock or death.
This symbol, wherever used, alerts you to important
operating and maintenance instructions.
Please read.
Protective Ground Terminal
AC mains (Alternating Current)
Hazardous Live Terminal
ON: Denotes the product is turned on.
OFF: Denotes the product is turned off.
WARNING
Describes precautions that should be observed to prevent
the possibility of death or injury to the user.
CAUTION
Describes precautions that should be observed to prevent
damage to the product.
WARNING
Power Supply
It ensures that the mains source voltage (AC outlet)
matches the voltage rating of the product. Failure
to do so could result in damage to the product and
possibly the user.
Unplug the product before and during elect rical storms
and when the mixer is not going to be used for long
periods of time to reduce the risk of electric shock or
fire.
External Connection
Always use proper ready-made insulated mains cabling
(power cord). Failure to do so could result in shock/death
or fire. If in doubt, seek advice from a regis tered electrician/
authorized maintenance centre.
Do Not Remove Any Covers
Within the product there are areas where high voltages
may present. To reduce the risk of electric shock do not
remove any covers unless the AC mains power cord is
removed.
Covers should be removed by qualified service per-
sonnel only.
No user serviceable parts inside.
DO NOT OPEN
Fuse
To prevent fire and damage to the product, use only the
recommended fuse type as indicated in this manual.
Do not short-circuit the fuse holder. Before replacing the
fuse, make sure that the product is OFF and discon-
nected from the AC outlet.
Protective Ground
Before turning the product ON, make sure that it is con-
nected to Ground. This is to prevent the risk of electric
shock.
Never cut internal or external Ground wires.
Likewise, never remove Ground wiring from the Protective
Ground Terminal.
Operating Conditions
Always install in accordance with the manufacturer's
instructions.
To avoid the risk of electric shock and damage, do not
subject this product to any liquid/rain or moisture.
Do not use this product in close proximity to water.
Do not install this product near any direct heat source.
Do not block ventilation areas.
Failure to do so could result in fire. Keep product away
from naked flames.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions
Follow all instructions
Keep these instructions. Do not discard.
Heed all warnings.
Only use attachments/accessories specified by the
manufacture
Power Cord and Plug
Do not tamper with the power cord or plug. These are
designed for your safety.
Do not remove Ground connections!
If the plug does not fit your AC outlet seek advice from
a qualified electrician.
Protect the power cord and plug from an y physical stress
to avoid risk of electric shock.
Do not place heavy objects on the power cord. This
could cause electric shock or fire.
Cleaning
When required, either blow off dust from the product or
use a dry cloth.
Do not use any solvents such as Benzol or Alcohol.
For safety, keep product clean and free from dust.
Servicing
Refer all servicing to qualified service personnel only.
Do not perform any servicing other than those instruc-
tions contained within the User's Manual.
1
Advertisement
