Unpacking; Piece Inventory - Grizzly H2801 Instruction Manual

Unpacking

The jointer and hardware (shown in Figure 2) are
shipped from the manufacturer in a carefully
packed carton. If you discover the machine is
damaged after you have signed for delivery, and
the truck and driver are gone, you will need to file
a freight claim with the carrier. Save the contain-
ers and all packing materials for possible inspec-
tion by the carrier or its agent. Without the pack-
ing materials, filing a freight claim can be difficult.
If you need assistance determining whether you
need to file a freight claim, or with the procedure
to file one, please contact our Customer Service.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Figure 2. Model H2801 base unit and assembly
H2801 4" Jointer
parts.

Piece Inventory

After all the parts have been removed from the
carton, you should have:
Part
• Jointer Unit
• Fence
• Push Blocks
• Left Trunnion
• Right Trunnion
• Cap Screws M5-.8 x 8
• Lock Washers 5mm
• Slotted Screws M5-.8 x 10
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedien-
cy, replacements can be obtained at your local
hardware store.
Qty
1
1
2
1
1
4
4
4
-7-