10/100 Lan Supported - AOpen S661FXm-FSN User Manual

10/100 LAN Supported

On the strength of SIS 10/100 LAN controller on board, this motherboard
provides 10/100Mbps Ethernet for office and home use. The Ethernet RJ45
connector is located on the top of USB connectors. The right hand side LED
indicates link mode; it lights in yellow when linking to network. The left hand side
LED indicates the transfer mode and will light in green when data is transferring
at 100Mbps (never lights while at 10Mbps). To enable or disable this function, you
may simply adjust it through BIOS. To enable LAN wakeup function, you have to
set the "Wake on PCI Card" enable in the BIOS "Power Management Setup"
section.
Speed LED (Left)
Green 100Mbps
28
ACT LED (Right)
Yellow