Table of Contents
Advertisement
10/100/1000Mbps LAN Supported (1000Mbps for
s760GXm-SL only)
On the strength of Gigabit LAN controller (for s760GXm-SL) on board, this
motherboard provides 10/100/1000Mbps Ethernet for office and home use (for
s760GXm-S / s760GXm, it is 10/100 Mbps). The Ethernet RJ45 connector is
located on the top of USB connectors. The right hand side LED indicates link mode;
it lights in yellow when linking to network. The left hand side LED indicates the
transfer mode and will light in green when data is transferring at 100Mbps (never
lights while at 10Mbps), but will light in orange when transferring in Gigabit's
mode. To enable or disable this function, you may simply adjust it through BIOS.
To enable LAN wakeup function, you have to set the "Wake on PCI Card" enable in
the BIOS "Power Management Setup" section.
Speed LED (Left)
Green 100Mbps
Orange Gigabit mode
20
ACT LED (Right)
Yellow
Advertisement
Table of Contents
