10/100/1000Mbps Lan Supported (1000Mbps Only For I915Gm-Ie) - AOpen i915Gm-IE User Manual

10/100/1000Mbps LAN Supported (1000Mbps Only for
i915Gm-IE)
On the strength of Gigabit LAN controller on board, this motherboard provides
10/100/1000Mbps (10/100Mbps is for i915Gm-I) Ethernet for office and home
use. The Ethernet RJ45 connector is located on the top of USB connectors. The
right hand side LED indicates link mode; it lights in yellow when linking to network.
The left hand side LED indicates the transfer mode and will light in green when
data is transferring at 100Mbps (never lights while at 10Mbps), but will light in
orange when transferring in Gigabit's mode. To enable or disable this function,
you may simply adjust it through BIOS. To enable LAN wakeup function, you have
to set the "Wake on PCI Card" enable in the BIOS "Power Management Setup"
section.
Speed LED (Left)
Green 100Mbps
Orange Gigabit mode
24
ACT LED (Right)
Yellow