Daikin EKHBH016BB3V3 Operation Manual page 12

Indoor unit and options for air to water heat pump system
Hide thumbs Also See for EKHBH016BB3V3:
Table of Contents

Advertisement

Programming space cooling, quiet mode, or booster heater
(1)
mode
5 sec
5 sec
(1) Only applicable for tank with built-in electrical booster heater (EKHW*).
Operation manual
11
Programming space cooling, quiet mode, or booster heater mode
is carried out as follows:
Press the < button.
1
The actual mode is blinking.
Use the pi and pj buttons to select the mode you want
2
to program (space cooling
m
The selected mode is blinking.
3
Press the < button to confirm the selected mode.
The first programmed action is displayed.
Use the pi and pj buttons to consult the programmed
4
actions.
This is called the readout mode. Empty program actions (e.g. 3
and 4) are not displayed.
5
Press the < button for 5 seconds to enter the programming
mode.
6
Use the < button to select the action number you would like to
program or to modify.
7
Use the pi and pj buttons to set the correct action time.
Use the ba button to select:
8
■ For space cooling:
5 sec
■ For quiet mode and booster heater mode
9
Repeat steps
mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
10 Press the < button for 5 seconds to store the programmed
actions.
If the < button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 is deleted.
You automatically return to step 4. By pressing the pr button
several times, you return to previous steps in this procedure and
finally return to normal operation.
5 sec
INFORMATION
Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the
pr button.
c
, quiet mode
(1)
).
x: switch cooling and the controller off.
-
9: set the temperature by means of the bi and
-
bj buttons.
a: to select automatic temperature calculation.
-
button to enable or disable the x action.
6
to
8
to program the other actions of the selected
INFORMATION
Programming the booster heater operation
valid if field setting [4-03]=1, 2, or 3.
Indoor unit and options for air to water heat pump system
(1)
s
, or booster heating
(1)
: use the ba
(1)
time is only
EKHBH/X016BB
4PW62573-1 – 10.2010

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents