Daikin EKHBH016BB3V3 Operation Manual
Daikin EKHBH016BB3V3 Operation Manual

Daikin EKHBH016BB3V3 Operation Manual

Indoor unit and options for air to water heat pump system
Hide thumbs Also See for EKHBH016BB3V3:

Advertisement

OPERATION MANUAL

Indoor unit and options for air to water heat
pump system
EKHBH016BB3V3
EKHBH016BB6V3
EKHBH016BB6WN
EKHBH016BB6T1
EKHBH016BB9WN
EKHBH016BB9T1
EKHBX016BB3V3
EKHBX016BB6V3
EKHBX016BB6WN
EKHBX016BB6T1
EKHBX016BB9WN

Advertisement

Table of Contents
loading

Summary of Contents for Daikin EKHBH016BB3V3

  • Page 1: Operation Manual

    OPERATION MANUAL Indoor unit and options for air to water heat pump system EKHBH016BB3V3 EKHBH016BB6V3 EKHBH016BB6WN EKHBH016BB6T1 EKHBH016BB9WN EKHBH016BB9T1 EKHBX016BB3V3 EKHBX016BB6V3 EKHBX016BB6WN EKHBH016BB EKHBX016BB6T1 EKHBX016BB EKHBX016BB9WN...
  • Page 2: Table Of Contents

    Indoor unit and options for air to water EKHBH016BB*** Operation manual EKHBX016BB*** heat pump system 1. D ONTENTS EFINITIONS Page 1. Definitions.................. 1 1.1. Meaning of warnings and symbols..........1 1.1. Meaning of warnings and symbols 1.2. Meaning of used terms ..............1 2.
  • Page 3: General Safety Precautions

    The unit is the indoor part of the air to water ERHQ or ERLQ heat installed according to instructions in the documentation. pumps. This unit is designed for wall mounted indoor installation. The unit can be combined with Daikin fan coil units, floor heating Optional equipment: applications, low temperature radiators, Daikin domestic water...
  • Page 4: Operating The Unit

    4.2. Operating the digital controller PERATING THE UNIT Operating the EKHB* unit comes down to operating the digital controller. 4.1. Introduction CAUTION The heat pump system is designed to provide you a comfortable indoor climate for many years at low energy consumption. Never let the digital controller get wet.
  • Page 5: Name And Function Of Buttons And Icons

    4.3. Name and function of buttons and icons ACTION ICONS These icons indicate the programming actions for each day of the schedule timer. OFF ICON This icon indicates that the OFF action is selected when programming the schedule timer. 10. INSPECTION REQUIRED These icons indicate that inspection is required on the installation.
  • Page 6: Setting Up The Controller

    26. DOMESTIC WATER HEATING BUTTON 34. QUIET MODE BUTTON This button enables or disables heating of the domestic water. This button enables or disables quiet mode. This button is not used when the domestic hot water tank is not If the controller is set in permission level 2 or 3 (refer to "5.
  • Page 7: Description Of The Operation Modes

    4.5. Description of the operation modes Only for [4-03]=4 or 5 In this mode, the indoor unit will heat up the domestic hot water tank. Space heating operation (h) There are several modes for heating up the domestic water tank: In this mode, heating will be activated as required by the water Storage temperature set point.
  • Page 8: Quiet Mode Operation (S)

    Switch on the unit by pushing the button. Quiet mode operation ( The operation LED lights up. Quiet mode operation means that the outdoor unit works at reduced INFORMATION capacity so that the sound produced by the outdoor unit drops. This When the unit is connected to an external room implies that the indoor heating (cooling) capacity will also drop.
  • Page 9: Schedule Timer Operation

    Displaying actual temperatures What can the schedule timer do? Push the button for 5 seconds. The schedule timer allows the programming of: icon and the entering water temperature are displayed. Space heating (refer to "Programming space heating or The icons are flashing.
  • Page 10: Programming And Consulting The Schedule Timer

    4.7. Programming and consulting the schedule timer INFORMATION The status of this setting is only mentioned to indicate Getting started which settings and functions are applicable for your application. Programming the schedule timer is flexible (you can add, remove or alter programmed actions whenever required) and straightforward [4-03]=0, 1, 2, 3, or 4 is only for domestic hot water tank (programming steps are limited to a minimum).
  • Page 11: Programming

    Programming Programming space heating or domestic water heating Programming space heating or domestic water heating is carried out as follows: INFORMATION Returning to previous steps in the programming procedure without saving modified settings is done by pressing the pr button. Press the <...
  • Page 12 Programming space cooling, quiet mode, or booster heater Programming space cooling, quiet mode, or booster heater mode mode is carried out as follows: INFORMATION Returning to previous steps in the programming procedure without saving modified settings is done by pressing the pr button.
  • Page 13: Consulting Programmed Actions

    To copy programmed actions to the next day, proceed as follows: Consulting programmed actions Press the < button. Consulting space heating or domestic water heating actions The actual mode is blinking. Consulting space heating or domestic water heating is carried out as Use the pi and pj buttons to select the mode you want follows.
  • Page 14: Field Settings

    Save the new value by pressing the pr button. IELD SETTINGS Repeat step 2 through 4 to change other field settings as required. NOTICE When finished, press the z button to exit FIELD SET MODE. The default values mentioned in "Field settings table"...
  • Page 15 [1] Weather dependent set point [2] Disinfection function The weather dependent set point field settings define the parameters Applies only to installations with a domestic hot water tank. for the weather dependent operation of the unit. When weather The disinfection function disinfects the domestic hot water tank by dependent operation is active the water temperature is determined periodically heating the domestic hot water to a specific temperature.
  • Page 16 (2) or reheat is disabled (0) (>60°C). In that case Daikin suggests to install a shunt pump and a heater element parallel on the domestic hot water tank according to ■...
  • Page 17 [9-05~9-08] Automatic setback function INFORMATION Setback function provides the possibility to lower the water ■ Make sure the domestic water is only heated up to the temperature during space heating. The setback function can for domestic hot water temperature you require. instance be activated during the night because the temperature Start with a low domestic hot water storage demands during night and day are not the same.
  • Page 18 [A] Quiet mode [E] Unit information readout ■ [E-00] Readout of the software version (example: 23) This field setting allows to select the desired quiet mode. Two quiet modes are available: quiet mode A and quiet mode B. ■ [E-01] Readout of the EEPROM version (example: 23) In quiet mode A, priority is given to the outdoor unit operating quietly ■...
  • Page 19: Field Settings Table

    Field settings table Installer setting at variance with default value First Second Default code code Setting name Date Value Date Value value Range Step Unit User permission level User permission level — Weather dependent set point Low ambient temperature (Lo_A) –10 –20~5 °C...
  • Page 20 Installer setting at variance with default value First Second Default code code Setting name Date Value Date Value value Range Step Unit Installation related setting Installation related setting Installation related setting Not applicable. Do not change the default value. — —...
  • Page 21 Installer setting at variance with default value First Second Default code code Setting name Date Value Date Value value Range Step Unit Solar kit Solar priority mode setting — Installation related setting Installation related setting Installation related setting Installation related setting Not applicable.
  • Page 22: Maintenance

    This maintenance should be parts must be done in accordance with the applicable legislation. carried out by your local Daikin technician (see installation manual). Your product is marked with this symbol. This means that The only maintenance which may be required by the operator is: electrical and electronic products shall not be mixed with unsorted household waste.
  • Page 24 4PW62573-1 10.2010...

Table of Contents