American Audio encore2000 User Manual page 33

A. Load Default – Press the Track Knob to enter load defaults. (LCD displays "Load
OK")
Will reset all settings to factory default except for Firmware version.
B. Exit & Save – Exit & Save setting to next power on (LCD displays "Saving")
This will save all changes. If changes are not saved, the unit will revert to last saved
changes on power off.
Press the TRACK knob to fast exit & save in any operating mode.
Note:
Sleep Time
The CD player automatically shuts off the transport and laser after about 15 minutes
when in pause or cue mode). This extends the life of your motor drive and laser. During
sleep mode the display shows the word SLEEP. To wake up the player, just press the
cue or play button, the display turns to normal and is ready to receive instructions. You
can enter the Sleep Time Menu to adjust the sleep time; the range is 5~120 minutes.
Calibrating the Jog Wheel Touch Sensor
Before you power on the Encore2000™ hold down the Pitch Percentage Button (7) till
the display reads A / D=2XX-255, now release the Pitch Percentage Button (7) and the
calibrated value will be saved. Note: When calibrating the jog wheel, please avoid
touching the jog wheel.
©American Audio® - www.americanaudio.eu Encore2000™ User Manual Page 33