To create a call coverage button (ETR 18D/ETR 34D Phone)
1. At the phone press Feature 00.
2. Program Extension: is shown on the display.
3. Press the button that you want to edit or enter a number between 03 to 80 to select a button. The current setting
of the button is displayed.
4. Dial FEATURE 20.
5. At the Call Coverage Orig: prompt enter the extension number for which the button is being programmed.
6. At the Call Coverage Dest: prompt enter the destination extension number for the call coverage calls.
7. The current setting of the button will now be set to Call Coverage O <covered extension> D <destination
extension>.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To create a call coverage button (1408/1416 Phone)
1. At the extension press Admin.
2. Press the programmable button you want to change. Alternatively:
· Use the
up or down
· At the Button: prompt press the button to edit or enter from 03 to 80.
3. The current setting of that button is displayed.
4. Press Program and either dial #20 or use the
Coverage and press Select.
5. At the Call Coverage Orig: prompt enter the extension number for which the button is being programmed.
6. At the Call Coverage Dest: prompt enter the destination extension number for the call coverage calls.
7. The current setting of the button will now be set to Call Coverage O <covered extension> D <destination
extension>.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
PARTNER User Guide
IP Office PARTNER Version
arrows to scroll to Telephone Programming. Press Select.
up or down
arrow buttons to scroll the display to Call
- Issue 1b (22 February 2010)
Page 28