Parts & Features - Husky 395-226 Owner's Manual

Parts & Features
See figures below for reference
Air Intake Filter
Provides clean air to the pump and must always be kept free of debris. Check on a daily basis or before each use.
Outlet Tube
Oil Fill Cap
Oil Sight Gauge
Check Valve
When the pump is not in operation, the valve closes to retain air pressure inside the tank. An internal component.
Regulator Gauge
Indicates the outgoing air pressure to the tool and is
controlled by the regulator.
Tank Pressure Gauge
Indicates the reserve air pressure in the tank.
Pressure
Relief Tube
Quick Connect
Offers a quick release feature for attaching and
removing the air hose.
Tank Drain Valve
Used to drain condensation from the air tank. Located at bottom of tank.
3
Pressure Switch
This controls the power to the motor and
also the cut-in/cut-out pressure settings.
This switch serves as the Auto-On/Off posi-
tions for the unit.
Tank Safety Valve
Used to allow excess tank
pressure to escape into the
atmosphere. This valve should
only open when the tank
pressure is above the maximum
rated pressure.
Regulator
The air pressure coming from
the air tank is controlled by the
regulator. To increase the pres-
sure, turn the knob clockwise,
and to decrease the pressure,
turn the knob counterclockwise.