Table of Contents
Advertisement
13-1. e remote transmitter has four numerical buttons:
0 = Off
1 = Low speed
2 = Medium speed
3 = High speed
13-2. For best operation, start the fan by pressing 3 (high), and then
select your desired speed.
13-3. e reversing switch reverses the direction of the fan.
13-4. e up dimmers turn the light on and can be used to increase
the brightness if the light is already on.
13-5. e down dimmers turn the light off. You can also use them to
dim the light.
13-6. When necessary, replace the battery with a 12-volt type
23A, MN-21 battery or equivalent. To access the battery
compartment, snap the front part off of the wall plate. 10-11
(You can use a screwdriver and the small indentation under the
on/off switch to pry off the keypad assembly.) When you have
finished, press the keypad assembly back into the wall box.
41868-01 • 02/20/04
13 • Operating the Wall Control
Reversing
Switch
Down
Dimmers
Battery
Compartment
Up
Dimmers
Steps 13-1 – 13-5
Step 13-6
Hunter Fan Company
17
Hide quick links:
Advertisement
Table of Contents
