Programming At A Glance - Trane TCONT600AF11MA Owner's Manual

This Comfort Control is ready to go!
Your new Comfort Control is pre-programmed and ready to go.All you have to do
is set the time and day. Then check the settings below and change if needed:
1 Set time and day (required for proper operation)................................See page 6
2 Select fan setting (Auto/On): Preset to Auto ......................To change, see page 7
3 Select system setting (Heat/Cool): Preset to Heat ..............To change, see page 8
4 Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ..............................................To change, see pages 9-11
ONE-TOUCH TEMPERATURE CONTROL: You can override the program schedule at any
time, and manually adjust the temperature (see pages 12-13).
3