Protech Systems PROX-1750 User Manual page 72

EPP MODE SELECT:
This item allows you to configure the parallel port for the selected EPP
mode. The Selection of EPP port type is 1.7 or 1.9.
ECP MODE USE DMA:
This item allows you to configure the parallel port DMA channel for the
selected ECP mode. This selection is only available when ECP or
ECP+EPP is selected in Parallel Port mode.
PWRON AFTER PWR-FAIL:
This item allows you to select if you want to power on the system after
power failure.
ONBOARD SERIAL PORT 3:
ONBOARD SERIAL PORT 4:
Select a logical COM port name and matching address for the third and
forth serial ports. Select an address and corresponding interrupt for third
and forth serial port.
SERIAL PORT 3 USE IRQ:
SERIAL PORT 4 USE IRQ:
The items set the IRQ address of the serial ports.
Prox-1750G1/G2 USER
'
S MANUAL
Chapter 4 Award BIOS Setup
Page: 4-17