Installation Checklist - Fisher & Paykel DishDrawer DD603 User Manual

Prefinished and integrated
Hide thumbs Also See for DishDrawer DD603:
Table of Contents

Advertisement

INSTALLATION CHECKLIST

Your Installer MUST have completed and checked the following:
The
is level and square.
The
is fastened securely to the cabinetry.
The
opens and closes freely. The
the cabinetry.
For the Integrated models, check the
The power supply is connected and switched on.
The inlet water hose is connected and turned on. There should be no leaks.
The drain hoses are connected and there are no leaks.
The spray arm is in the center and can freely rotate.
The rinse program has been run.
There must be no kinks, or obstructions in the drain hose(s). The water level will be below the stainless steel fi lter
plate at the end of the wash program. It is normal to fi nd some water in the drain fi lter area.
The Installer is responsible for the
must be free to close completely with no resistance from
5 / 16
" (8mm) air gap has been achieved in the correct place.
installation. Incorrect Installation is not covered by warranty.
C H E C K L I S T
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dishdrawer ds603i

Table of Contents