Problem Solver - Fisher & Paykel DishDrawer DD603 User Manual

P R O B L E M S O L V E R
If the does not appear to be operating properly, check this chart below and correct where possible.
PROBLEM
will not
start
Excess water in
Water marks on the
dishes
Unclean dishes
POSSIBLE CAUSE
Power supply not connected.
The drawer not closed properly.
Lock feature is on.
START/PAUSE button not pressed.
Drain hose(s) bent or kinked.
Blocked fi lters and/or drain
hose(s).
Insuffi cient rinse agent.
Rinse agent setting too low.
overloaded or
incorrectly loaded.
Wash program unsuitable for
the load.
Spray arm unable to rotate.
Overloading the
Filter plate/drain fi lter
incorrectly inserted.
Detergent put in wrong
compartment.
Excessive food not removed
off dinnerware.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are blocked.
Filter plate/drain fi lter blocked.
Mega rack incorrectly installed.
Hard water situation.
WHAT TO DO
Connect the power supply.
Ensure drawer is fi rmly closed.
Turn Lock off. Hold down LOCK button until
the "lock" symbol (Prefi nished) or green light
(Integrated) disappears.
Press START/PAUSE button.
Straighten the drain hose(s).
Clean the fi lter plate/drain fi lter. Unblock the
drain hose(s).
Refer to User Maintenance section.
Check if there is enough rinse agent in dispenser.
Increase the rinse agent setting.
Refer to section on Loading.
Refer to Wash Programs section for suitable
wash program, or the soils were too heavily
baked on & may need soaking.
Ensure no items are blocking the spray arm path.
. Refer to the section on Loading.
Refer to User Maintenance section.
Detergent must be placed in the large
compartment.
Scrape all food scraps off dinnerware.
Use recommended brands of dishwasher
detergent.
Refer to Wash Programs section or the
detergent manufacturer's instruction.
Clean the spray arm.
Clean filter plate and drain filter.
Refer to Accessories section for correct
installation.
We recommend the installation of a water
softener. Use detergents with a high phosphate
content and increase the dosage.