Download Print this page
Datavideo SE-800 Quick User Manual

Datavideo SE-800 Quick User Manual

Four-input sd video switcher
Hide thumbs Also See for SE-800:

Advertisement

SE-800
four-input SD video switcher
The SE-800 AV & DV video switchers are flexible
solutions for any studio and are supported by a large
family of Datavideo accessories.
The SE-800 comes in digital and analog versions (SE-800DV and SE-
800AV), accommodating almost any studio set-up. The DV model includes
4 DV/AV inputs and outputs for SDI, DV, composite, component, and
S-Video. It also includes an output for an SDI overlay channel for use with
a CG (character generator) that uses a down stream keyer (DSK). Using
the SDI overlay allows the character generator to appear in all of the SE-
800DV outputs. The SE-800 switchers also include an internal audio mixer
with both mic and line level audio inputs. (Built-in audio delay will ensure
correct lip-synch works on all formats) Both models include TBC and a
format converter, so each input source may be seen with a composite
video monitor.
Each unit is compatible with a family of Datavideo accessories: monitor
holders, shipping cases, mobile studios (and their compatible products)
intercoms, character generators, and more. We have several SE-800 "kits"
available that include a switcher and monitor, but you can build a kit of
your own with the available accessories.
Features
Monitor output: one composite output for each input via
included composite video format converters
Next source preview and tally – optional with RMC-140
No gen-lock required – frame synchronizer and TBC built-in
for each active source for flicker-free switching
Input selector – main and sub bus selector. Cut direct
between sources via the main bus
Preset keys – 30 quick selection keys for preset event
and effects
Voice sync – audio advanced to audio delayed, +3/-19 frame
Audio mixer – 6 channel stereo mixer for mixing the audio
from video with house audio or AUX inputs or microphone
Adjustable audio delay for frame accurate and perfect
synchronization between video and external audio
Joystick control can be used for either RGB color correction
(white balance corrections) or position the PIP or Mosaic effect
Picture-In-Picture (two fixed sizes)
Color processor – brightness, contrast, and color setting white
balanced for each input. Last settings saved at power up
Digital effects – 15 transitions plus border, six speeds, plus six
special effects
Easy tilt with the Datavideo CG-100 character generator
Included
Aluminum Accessory
Case
SDI graphics overlay – use any SDI based character
generator with DSK (down stream keyer). SE-800DV has SDI
overlay built in, SE-800AV requires upgrade card
Four tally outputs – requires RMC-140 with
red/yellow tally lights
GPI input trigger controls 30 pre-programmed effects in sequence
Specifications
Video
DV version – inputs: 4 inputs in DV, composite,
component and S-Video
DV version – outputs: SDI, DV, composite,
component, and S-Video. SDI overlay for graphics
or character generators
AV version – inputs: 4 inputs in composite, component,
and S-Video
AV version – outputs: composite, component, and S-Video
Audio
Inputs: unbalanced, 4 sources (A, B, C, D), aux 1, aux 2,
stereo
Outputs: unbalanced, 2 main stereo outputs
Control
RS-232 remote control interface
Power
15V 4.5A DC 110/220 power supply

Optional Accessories

Quad 4" TFT LCD Monitor
TLM-404H
Dual 7" TFT LCD Monitor
TLM-702
LCD Monitor Holder
RKM-4N7
19

Advertisement

loading

Summary of Contents for Datavideo SE-800

  • Page 1: Optional Accessories

    Datavideo accessories. The SE-800 comes in digital and analog versions (SE-800DV and SE- 800AV), accommodating almost any studio set-up. The DV model includes 4 DV/AV inputs and outputs for SDI, DV, composite, component, and S-Video.
  • Page 2 (Y/C) & composite Video Optional Accessories RMC-120 Ethernet remote controller System Requirements CPU: Pentium 4, 2.4GHz RAM: 512MB RAM Screen Resolution: 1024x768 OS: Windows XP PC/Network control box allows full control of SE-800 via Datavideo's free software (available online on our website)
  • Page 3 Only Remote Control Software Connect the SE-800 direct to a RMC-120 port or a Ethernet port on a computer and control the switcher using special computer software RMC-120 Ethernet Control Box RS-232 cable Ethernet cable to computer...