Vertex Standard VX-4500 Operating Manual page 5

C
ONTROLS
Transceiver Status Indicator
The "A" and "B" indicators show current transceiver status, which can be cus-
tomized via programming by your Vertex Standard dealer to meet your commu-
nications/network requirements. The possible "A" and "B" displays are explained
below.
TX/BUSY Indicator
Indicates transceiver's Transmit/Receive Status.
S
MONI
SCAN CH
PRI-1
Low Power
TA ( Talk Around )
Encryption
Emergency
Horn Alert
PA
( Public Address )
Lock
ACC2
RFC
REC/PLAY
( Required optional Unit )
VX-4500/-4600 S
& C
ONNECTORS
T S
RANSCEIVER
I
A B
This indicator is illuminated constantly when the sig-
naling feature is disabled. The indicator blinks while
the audio is passing normally.
Illuminates the indicator when the scan enabled
channel is recalled.
Illuminates the indicator when the Priority-1 chan-
nel is activated.
Illuminates the indicator when the radio's transmit-
ter is set to the "Low Power" mode.
Illuminates the indicator when the "Talk Around" func-
tion is activated.
Illuminates the indicator when the "Voice Scrambler"
function is enabled.
Illuminates the indicator when the "Emergency" fea-
ture is activated.
Illuminates the indicator when the "Horn Alert" fea-
ture is activated.
Illuminates the indicator when the radio is turned to
a PA amplifier.
Illuminates the indicator when the "Lock" feature is
activated.
Illuminates the indicator when the output port "2" on
the Accessory Connector is turned to "ON".
Illuminates the indicator when the radio is in the
"Ready for Communication" condition while operat-
ing with the 2-Tone or 5-Tone signaling.
Illuminates the indicator when the incoming mes-
sage is recorded or storage message is played back.
O
VX-4500
I
TATUS NDICATOR
D
M 3