Vertex Standard VX-4500 Operating Manual page 21

S D
IAL ( This function is only available in the VX-4600 )
PEED
Your Vertex Standard dealer may have pre-programmed Auto-Dial telephone num-
ber memories into your radio.
To dial a number:
If the optional MH-75
signed programmable key, then press the microphone's numeric key ( [ 0 ] - [ 9 ] )
corresponding to the Auto-Dial memory number which is provided by your Ver-
tex Standard Dealer, then press the PTT switch. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
If the normal (without keypad) microphone is used, press the [ ] / [ ] keys to
select the Auto-Dial memory number which is pre-programmed by your Vertex
Standard dealer, then press the PTT switch. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
DTMF C S
ODE
This function is only available in the VX-4600 and requires the Optional MH-75
Press (or press and hold) the assigned programmable key to start storing the DTMF
dialing sequence. After entering to enter all DTMF digits from the MH-75
pad, you can transmit the code by pressing the PTT switch.
VX-4500/-4600 S
A
DVANCED
microphone is used, press (or press and hold) the as-
A8J
ET
O
O
PERATION
M
16-Keypad Microphone
's key-
A8J
19