Option Switch - Vertex Standard VX-4500 Operating Manual

S U /D
OWN ( This function is only available in the VX-4600 )
TATUS P
Press (or press and hold) the assigned programmable key to select a 5-tone status
code from the pre-defined status list.
S C
HECK ( This function is only available in the VX-4600 )
TATUS
Press (or press and hold) the assigned programmable key to check the 5-tone receive
status code. When you press this key, the display will indicate the "Message" corre-
sponding to the receive status condition per the pre-defined status list.
D
UTY
Press (or press and hold) the assigned programmable key to toggle the Duty func-
tion of the 2-tone/5-tone decoder "On" and "Off".
When the Duty function is set to "On", the user will always hear (depending on the
sub-audio signaling) all traffic on the paging channel. The radio will sound the pag-
ing alert when it receives the programmed 2-tone/5-tone code.
When the Duty function is set to "Off", the user will NOT hear normal radio traffic
on the paging channel. The radio will sound the paging alert and unmute only when
it receives the programmed 2-tone/5-tone code.
ID C
HECK ( This function is only available in the VX-4600 )
This function allows logged ID of the DTMF Signaling and 5-tone Signaling to be
reviewed and relayed (5-tone Signaling only) to a specific station:
Press (or press and hold) the assigned programmable key to display the logged
ID of the DTMF Signaling and 5-tone Signaling.
Press the [ P4 ] key to select the category ("DTMF Signaling" or "5-tone Signal-
ing") to be reviewed, then press the [ ] / [ ] keys to select the ID.
Press the [ P2 ] key to toggle the display between the "ID code display" and "Tag
display".
Press the [ P1 ] key to send the Call back, when recalling the ID of the "5-tone
Signaling", if desired.
O S
PTION WITCH
Activates the optional accessory "1" while pressing the assigned programmable key.
VX-4500/-4600 S
A
DVANCED
1
O
O
PERATION
M 21