Usage; Hardware Maintenance - Razor E90 Series Owner's Manual

USAGE

❑ Starting the Scooter
To start unit, turn on power switch, press the push button throttle
(A) and kick start up to 3mph (5mh) (B).
❑ Stopping the Scooter
To stop unit, release the push button throttle (A) and step down on
the rear fender brake (B) until the unit comes to a complete stop.
CONNECTORS/HARDWARE MAINTENANCE
❑
Brake
Check the brakes for proper function. When you step on the brake,
the brake should provide positive braking action. When you apply
the brake with the speed control on, the brake cut-off switch
should cut power to the motor.
Frame, Fork and Handlebars
❑
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or wall and wreck and bend or break a frame. Get in the habit of
inspecting your scooter on a regular basis.
❑
Wheels
Periodically inspect the tires for excess wear and regularly check
the wheels.
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code located on the white label on your product or back of charger available for better assistance.
Do not use this product for the first time until you have
charged the battery for at least 12 hours. Failure to follow
these instructions may damage your product and void your
❑
Safety Gear
Always wear proper protective gear such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always
wear athletic shoes (lace-up shoes with rubber soles), never ride
barefooted or in sandals, and keep shoelaces tied and out of the
way of the wheels, motor and drive system.
❑
Battery
Make sure the power switch is turned off whenever the scooter is
not in use. Never store the product in freezing or below freezing
temperatures! Freezing will permanently damage the battery.
Failure to recharge the battery at least once a month may result in
a battery that will no longer accept a charge.
warranty.
4
Note: Electric scooter must
be moving at 3mph/5kmh
while pressing the push
button throttle to engage
motor.