Troubleshooting - Lucent Technologies DEFINITY User Manual

Troubleshooting

Troubleshooting
When an error occurs in the operation of the Remote Module, you
should check for malfunctions in an organized manner. Follow
these steps when troubleshooting the Remote Module:
1. Verify that the programmed telephone number is correct.
2. Check all interconnecting cables to ensure that they are
properly seated.
3. Verify that the DIP switches are set correctly.
4. Check the circuits to ensure that they are free of noise and
meet the specifications listed in Chapter 1, Introduction.
5. Verify that the power LEDs are illuminated.
6. If you cannot locate the source of the problem, contact your
system administrator and describe the problem.
5-2
Issue 2 July 1997