Starting The Operation - Lucent Technologies DEFINITY User Manual

Operating the Remote Module

Starting the Operation

You start the operation of the Remote Module by a process similar
to logging in on other systems. Follow these steps to start the
operation of the Remote Module:
1. At the "Go Online?" screen, press
DEFINITY Extender system.
2. At this point, the Remote Module dials the Switch Module at the
programmed number (see "Setting the Telephone Number" in
Chapter 3, Programming). Figure 4-1 shows the sequence of
messages that appear on the telephone display during
connection of the Extender system.
4-2
Issue 2 July 1997
2
to start the operation of the