Side Panels - Watchguard XTM 33 Hardware Manual

Hardware Specifications
Rear View
Rear view of the device.
Network interfaces
The five Ethernet interfaces have standard RJ45 connectors and are labeled 0, 1, 2, 3, 4. All interfaces
support link speeds of 10, 100, or 1000 Mbps.
Antenna (wireless models only)
The XTM 3 Series Wireless device has a wireless antenna to the right of the network interfaces.
Fan
A rear cooling fan may be installed on some models.
Power input
A 12V/2A power supply is included with your device. Connect the AC adapter to the device and to a
power source. The power supply tip is plus (+) polarity. Use only the supplied AC power adapter.
Reset button
To reset the device, use the procedure in "Restore Factory Default Settings" on page 9.
USB interface
Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.
For more information about USB functions, see current Fireware XTM WatchGuard System Manager
Help or Fireware XTM Web UI Help.
Serial port (Console)
An RJ45 connector for the serial interface. An RJ45 serial cable is not included with the device.

Side Panels

Computer lock slot
The two side panels of the XTM 3 Series have a slot for a computer lock.
Antennas (wireless models only)
The two side panels of the XTM 3 Series Wireless have wireless antennas.
Wall mounting plate (wireless models only)
The wall mounting plate enables you to put the device in a good location to increase the range.
4 WatchGuard XTM 3 Series