Using Stability Control - Ford F-150 Owner's Manual

USING STABILITY CONTROL

AdvanceTrac
Control (RSC
The system automatically activates when
you start your engine. You can turn off the
Button func-
tions
Default at start-
up
Button pressed
momentarily
Button pressed
and held for
more than 5
seconds at
vehicle speed
under 35 mph
(56 km/h)
Vehicle speed
exceeds 35 mph
(56 km/h) after
button is
pressed and
held for more
than 5 seconds
F150 (TF6) , enUSA
Stability Control
with Roll Stability
)
AdvanceTrac with RSC Features
Stability Roll stability
control OFF
light
Illuminated
during bulb
check
Illuminated
solid
Flashes then
illuminated
2
solid
Illuminated
solid
electronic stability control and roll stability
control portions of the system off below
35 mph (56 km/h). When the transmission
is in position R, they are disabled. You can
turn off the traction control portion of the
system independently. See Using
Traction Control (page 164).
Electronic
control stability
control
Enabled Enabled
Enabled
Enabled
Disabled Disabled
Enabled
Enabled
166
Traction
control system
Enabled
1 1
Disabled
4
Disabled
1 1
Disabled