Ford F-150 Owner's Manual page 107

Message
TRAILER DISCONNECTED
TRAILER SWAY REDUCE
SPEED
WIRING FAULT ON TRAILER
4WD
Message
CHECK 4X4
4X4 SHIFT IN PROGRESS
FOR 4X4 LOW APPLY BRAKE
FOR 4X4 LOW SHIFT TO N
FOR 4X4 LOW SLOW TO 3 MPH
TO EXIT 4X4 LOW APPLY
BRAKE
TO EXIT 4X4 LOW SHIFT TO N
TO EXIT 4X4 LOW SLOW TO 3
MPH
SHIFT DELAYED PULL
FORWARD
F150 (TF6) , enUSA
Information Displays
Displays when a trailer connection becomes discon-
nected, either intentionally or unintentionally, and has
been sensed during a given ignition cycle. Disregard
this status if your vehicle is not equipped with a factory
installed trailer brake controller. This message may
appear when an aftermarket TBC is used even when
Displays when the trailer sway control has detected
Displays if there are certain faults in the vehicle wiring
and trailer wiring/brake system. See Towing a Trailer
Displays when a 4X4 system fault is present. See
Using Four-Wheel Drive (page 151).
Displays when the 4X4 system is making a shift.
Displays when trying to select 4X4 LOW.
Displays when 4X4 LOW is selected and the vehicle is
Displays when 4X4 LOW is selected while the vehicle
Displays when 2WD is selected from 4X4 LOW mode.
Displays when 2WD is selected while the vehicle has
Displays when 2WD is selected while the vehicle is
May display when shifting to or from 4X4 LOW.
104
Action
the trailer is connected.
trailer sway.
(page 189).
Action
stopped.
is moving.
been stopped in 4X4 LOW.
operating in 4X4 LOW.