Memory Function - Ford F-150 Owner's Manual

Power Lumbar
(If Equipped)
E164101
The control is located on the outboard side
of the seat. Press the forward or rearward
side of the control for more or less support.

MEMORY FUNCTION

WARNINGS
Before activating the seat memory,
make sure that the area immediately
surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
Do not use the memory function
when your vehicle is moving.
This feature will automatically recall the
position of the driver's seat, power mirrors,
optional adjustable pedals and optional
steering column.
The memory control is located on the
outboard side of the driver's seat.
F150 (TF6) , enUSA
Seats
E162734
Saving a Pre-Set Position
1.
2. Move the memory features to the
3. Press and hold button 1 for about two
(IF EQUIPPED)
To program position 2, repeat the previous
procedure using button 2.
Note: You can save a memory pre-set at
any time.
Recalling a Pre-Set Position:
Press and release the pre-set memory
button desired. The seat, mirrors, pedals
and steering column will move to the
position stored for that pre-set.
Note: If the easy entry and exit feature is
enabled, any memory recall while the
ignition is off will move the seat and steering
column to the easy entry position.
You can recall a programmed memory
position:
•
•
You can program a remote entry
transmitter to recall a memory setting.
See Keys and Remote Controls (page
48).
116
1
2
Switch the ignition on.
desired positions using the associated
controls.
seconds until you hear a single chime.
When the ignition is off.
Or only if the transmission is in park (P),
neutral (N), or if the ignition is on.