The hinged rear perforated plates have five positions.
These are labelled in the illustration on the right with
the letters A to E.
All five positions can be used if the holding plates are
in the lower position (see above). Only positions B, C,
D and E are possible in the higher position!. If position
A is used, there will be a collision between the holding
plate and the seat frames.
The following seat heights are available:
Holding plate in lower position:
Position of perforated plate / seat height:
•
A / 44 cm
•
B / 45.5 cm
•
C / 45.5 cm
•
D / 46.5 cm
•
E / 47 cm
Holding plate in higher position:
Position of perforated plate / seat height:
•
B / 50.5 cm (at 6° seat angle)
•
C / 48.5 cm
•
D / 49.5 cm
•
E / 51.5 cm
45