Table of Contents
Advertisement
2. After the desired number is selected, dial the number by pressing
REDIAL again, lifting the handset, pressing SPEAKER or pressing
DIAL.
3. The selected number (32 digits maximum) will be redialed.
PAUSE
If you press the REDIAL/PAUSE button while storing a memory dial
number, it allows you to insert a 3.6-second pause in the dialing
sequence. This is particularly useful if you are connected to a PABX
system where you must dial an access code (usually the number 9) to
obtain an outside line. The button may be pressed more than once to
create a longer pause.
HOLD BUTTON
1.
NORMAL MODE
a.
Press HOLD and hang up the handset. The corresponding Line
button (L1 or L2) will begin to flash and will continue to flash until you
resume your conversation.
b.
To resume your conversation, lift the handset or that of any extension
phone on the same line or press the flashing LINE button.
c.
To answer a call on the other line while speaking on one line, place the
current line on hold. Press the ringing line button, Line 1 or Line 2. If you
want the second call to join you in a three-way conference, press the
CONF button.
d.
To place both calls on hold, press the hold button and both lines will be
on hold at the same time. The Line/Hold LEDs will light. To cancel hold
for only one line press the desired line button (Line 1/2). The other line
will remain on hold.
2.
PBX MODE
Press HOLD. The phone will dial out the code. Depending on the
PBX, it may now be necessary to hang up the handset. Note that the
line button will not flash in this mode.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX service
or for use of Call Waiting from your local telephone company. If you
have Call Waiting service, you can use the Call Waiting function per
the following instructions.
1. While having a conversation, another party calls and you hear a
tone.
2. Press FLASH once and release. The first conversation is placed on
hold and the second call can be answered.
3. Press FLASH again and release. You may speak to the first caller
again and the second call is placed on hold.
15
Advertisement
Table of Contents
