Great Dane GSRKA1934S Operator's Manual page 3

WARNING: The Engine Exhaust from this
product contains chemicals known to the
State of California to cause cancer, birth de-
fects or other reproductive harm.
California Proposition 65 Warning
All information, illustrations and specifications
in this manual are based on the latest infor-
mation at the time of publication. The right is
reserved to make changes at any time without
notice.
COPYRIGHT© 2007
Auburn Consolidated Industries, Inc.
All rights reserved
Great Dane, Chariot, Brutus, Scamper, Surfer,
and Super Surfer are registered trademarks
of Auburn Consolidated Industries, Inc.
Introduction
Using Your Operator's Manual
This manual is an important part of your machine and
should remain with the machine when you sell it.
Use the safety and operating information in the machine
operator's manual to operate and service the machine
safely and correctly.
An engine manufacturer's owner's manual has been pro-
vided with your machine. This will provide maintenance and
troubleshooting information for the engine installed in your
machine.
Specifications and design are subject to change without
notice.
Special Messages
Your manual contains special messages to bring attention
to potential safety concerns, machine damage as well as
helpful operating and servicing information. Please read all
the information carefully to avoid injury and machine dam-
age.
CAUTION: Avoid injury! This symbol and text
highlight potential hazards or death to the
operator or bystanders that may occur if the
hazards or procedures are ignored.
IMPORTANT: Avoid Damage! This text is used to tell
the operator of actions or conditions that might result
in damage to the machine.
NOTE: General information is given throughout the
manual that may help the operator in the operation or
service of the machine.
Product Identification
Record Identification Numbers
Surfer
GSRKA1934S Serial Number (637110001-)
If you need to contact an Authorized Service Center for
information on servicing, always provide the product model
and serial numbers.
You will need to locate the model and serial numbers for
the machine and for the engine of your machine and record
the information in the spaces provided.