Height Adjustable/Recline Stand (Optional) - HP Compaq Elite 8300 All-in-One Maintenance & Service Manual

Height adjustable/recline stand (optional)

An optional stand may be purchased to allow
●
height adjustment of 110 mm (4.3 inches)
●
rotation from landscape to portrait position
●
tilt backward up to +60 degrees
●
recline to 30 degrees from the desktop
WARNING!
service, position the computer vertically by grasping the sides of the display, and then raise the
display to the highest position.
Do not lay the computer down with the sliding stand in the low position. The stand may suddenly
release which could cause damage to equipment or injury.
Figure 1-7
If the height adjustable/recline stand is installed, before laying the computer down for
Height adjustable stand position options
Height adjustable/recline stand (optional) 7