Lopi GreenField Owner's Manual page 30

Finalizing the Installation
30
Right Log Placement
The right log has a hole on the bottom. Place the log so the bolt on the burner inserts into the hole on
the log (see photos below). Make sure the log is pushed back so it sits flat against both sides of the
bracket attached to the burner. Make sure the pilot has a gap to light the burner ports.
Left Twig Placement
The left twig has a hole in the bottom that fit over a pin on the back log (see photos below). Place the
twig as shown below. Note how the front of the twig rests on a flat spot on the left log.
© Travis Industries 4101028
(for qualified installers only)
100-01255_000