Table 7: Ht-496 Basicc - Grandstream Networks HT-496 User Manual

T 7: HT–496 Basic Configuration Settings Definitions
ABLE
End User Password Password to access the Web Configuration Menu. This field is case sensitive
Web Port
IP Address
DHCP hostname
DHCP domain
DHCP vendor class
ID
PPPoE account ID
PPPoE password
PPPoE Service
Name
Time Zone
Grandstream Networks, Inc.
VoIPon www.voipon.co.uk
with a maximum length of 25 characters.
By default, HTTP uses port 80. This field is for customizable web port.
There are two modes to operate the HT–496:
DHCP mode: not all the field values for the Static IP mode are used (even
though they are still saved in the Flash memory.) The HT–496 acquires its IP
address from the first DHCP server it discovers from the LAN it is connected.
Using the PPPoE feature: set the PPPoE account settings. The HT–496 will
establish a PPPoE session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These
fields are set to zero by default.
This option specifies the name of the client. This field is optional but may be
required by some Internet Service Providers. Default is blank.
This option specifies the domain name that client should use when resolving
hostnames via the Domain Name System. Default is blank.
Used by clients and servers to exchange vendor-specific information. Default is
blank.
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to
Point Protocol over Ethernet) connection.
PPPoE account password.
This field is optional. If your ISP uses a service name for the PPPoE
connection, enter the service name here. Default is blank.
Controls how the date/time displays according to the specified time zone.
HT–496 User Manual
Firmware 1.0.3.64
sales@voipon.co.uk Tel: +44 (0)1245 808195
Page 17 of 33
Last Updated: 1/2007
Fax: +44 (0)1245 600030