Tank; Fuel Filter Kd 225-400-440 (Version With Internal Filter); Fuel Filter For Kd 225 - 315 - 350 - 400 - 440 (Version With External Filter) - Kohler KD225 Workshop Manual

Water-cooled, indirect injection
Hide thumbs Also See for KD225:
Table of Contents

Advertisement

14
15
16
KD 225_315_350_400_440 Workshop Manual_cod. ED0053029330_1° ed_ rev. 00
17
To avoid explosions or fire outbreaks, do not smoke or use na-
ked flames during the operations.
Fuel vapours are highly toxic. Only carry out the operations out-
doors or in a well ventilated place.
Keep your face well away from the plug to prevent harmful va-
pours from being inhaled. Dispose of fuel in the correct way and
do not litter as it is highly polluting.

Tank

Unscrew the upper and lower studs and remove the washers, which
otherwise might make removal of the tank difficult. Next disconnect
the fuel and air bleeding tubes.
Completely empty the tank to make sure that no impurities remain.
When reassembling tighten the upper nuts to 15 Nm.

Fuel filter KD 225-400-440 (version with internal filter)

1 Fuel filter
2 Fuel tank
3 Filter sleeve
4 Filter cartridge
5 Flush ring
6 Nut
7 Union seal
8 Diesel fuel outlet union
9 Flat washer
See page 18 for the frequency with which the fuel filter must be repla-
ced.
See fig. 99 for the dimensions.

Fuel filter for KD 225 - 315 - 350 - 400 - 440 (version with external filter)

Loosen the clamps and disconnect the hoses.
Characteristics
Filtering area ≥ 390 cm
2
Paper porosity ≤ 7 µ m.
See page 18 for replacement
See fig. 98 for dimensions.
DISASSEMBLY/REASSEMBLY
8
- 25 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd315Kd350Kd400Kd440

Table of Contents