Going For A Run - Garmin Forerunner 610 Quick Start Manual

➍ ➌ ➋
3. Wrap the strap
chest, and connect the strap hook to
the loop.
note: The Garmin logo should be
right-side up.
4. Bring the device within range (3 m)
of the heart rate monitor.
tIP: If the heart rate data is erratic
or does not appear, you may have
to tighten the strap on your chest or
warm up for 5–10 minutes.
After you put on the heart rate monitor,
it is on standby and ready to send data.
When the heart rate monitor is paired, a
message appears, and
on the screen.
Forerunner 610 Quick Start Manual
➋
around your
➍
appears solid

Going for a Run

Before you can record history, you
must locate satellite signals
pair your Forerunner with an optional
foot pod.
1. From the timer page, select StARt
to start the timer ➊.
History is recorded only while the
timer is running. Your distance
and lap pace
page.
➊
The data fields shown are the
defaults. You can customize data
fields (page 9).
2. After completing your run, select
StoP.
(page
appear on the timer
➌
➋
➌
6) or
➋
7