Shock Absorbers - Splendide WD2100XC Training Manual

Removing the Bottom Panel
The tub is held in position by two shock absorbers. To access the
Shock Absorbers, First, place the washer-dryer on its left side.
Remove the 4 screws that secure the sheet metal cover to the
bottom of the washer. (Below) Now, remove the metal cover.
38
Accessing the Components

Shock Absorbers

The Shock Absorbers can be accessed once the bottom panel has been removed.
Removing the Shock Absorbers
Remove the bolts that secure the shock absorbers to the tub
using a 12mm, 15mm or 13mm socket (depending on serial
number).
Remove the plastic plugs that secure the shock absorbers to
the bottom of the case using needle nose pliers. (Fig. 4-27)
Fig. 4-27
Bolts
Plastic
Plugs