Garmin GPSMAP 6008 Owner's Manual page 84

Radar
Assigning a MARPA Tag to an Object
Note: MARPA requires the use of a heading sensor and an active GPS signal. The heading sensor must
provide the NMEA 2000 parameter group number (PGN) 127250, or the NMEA 0183 HDM or HDG output
sentence.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Complete an action:
• For the GPSMAP 6000 series, use the Rocker to select an object or location.
• For the GPSMAP 7000 series, touch an object or location.
Target
Acquire target.
4. Select
Removing a MARPA Tag from a Target Object
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Complete an action:
• For the GPSMAP 6000 series, use the Rocker to select a targeted object.
• For the GPSMAP 7000 series, touch a targeted object.
MARPA target
4. Select
Viewing Information about a MARPA-tagged Object
You can view the range, bearing, speed, and other information about a MARPA-tagged object.
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, or offshore.
3. Complete an action:
• For the GPSMAP 6000 series, use the Rocker to select a targeted object.
• For the GPSMAP 7000 series, touch a targeted object.
MARPA target.
4. Select
78
> Remove.
Target options
GPSMAP 6000/7000 Series Owner's Manual
®