Quadra-Fire 7100FP-BK-B Owner's Manual page 27

Figure 4.14
5. Remove 2 screws from timer linkage upper arm. Be
careful NOT TO DROP arm in bottom of fireplace. Figure
4.15.
Move arm left
Figure 4.15
6. Remove 2 screws from timer mounting plate. Place
your hand into the access door in the floor of the fire-
place. Let the timer assembly and plate drop down and
rotate it up through the access door. You will be looking
at the back side of the assembly. Figures 4.17 & 4.18.
Timer Plate
Figure 4.16
4/12
Remove 2
screws
Be careful not to
drop Linkage Arm
down into fireplace
433-1390K
Figure 4.17
Arm must be in this position
when re-installing
Rotate assembly up and
out through access door
Figure 4.18
7. Remove old air chamber cover. Place the cover under
the bottom of the firebox. Using a 7/16 wrench attach
the (2) 1/4-20 bolts as shown in Figure 4.19. Insert the
new timer assembly into the access door with the back
side towards you. Please note the correct position of
the linkage lower arm in Figure 4.18
Air Chamber Cover
Attach with 1/4-20 bolts
Figure 4.19
Page 27