Clarion VRX6570Rz Owner's Manual page 52

■ Connecting the Accessories
Connection to the external amplifier
•
The external amplifier cannot be connected unless the DSP is connected. For detailed information,
refer to the instruction manual of the DSP.
Connection to the security camera for vehicle
•
The rear vision camera for vehicle can be connected to the system expansion terminal on the main
unit. For detailed information, refer to the instruction sheet or manual for the rear vision camera.
Notes:
• A power supply box (sold separately) is required for connection of the main unit and the security camera.
• While the CCD camera is used, the navigation cannot be turned on.
Connection to the DSP
•
When the DSP is connected, use the Ce NET connector. The external amplifier is required when
connecting the DSP. When the DSP is connected, voice of navigation is output from the speakers
exclusive to the navigation.
Connection to car navigation equipment
•
When Clarion car navigation equipment is used, connect it to the system expansion terminal (CCD/
NAVI) and the RGB terminal of the main unit. For detailed information, refer to the operating in-
structions provided with car navigation equipment. When the NAVI is connected, the CCD camera
cannot be connected. When the Clarion NAVI is to be connected, set the INPUT to the NAVI posi-
tion.
If the specified lead of the cellular phone is connected to the phone mute
•
lead of the source unit, the audio mute is available when the cellular tele-
phone is used.
For audio mute setting in cellular telephone use, see page 41.
DAB (Digital Audio Broadcasting)
•
When the DAB is to be connected, use the Ce NET connector. For detailed information, refer to the
instruction manual of the DAB.
TV Tunner
•
When the TV TUNER is to be connected, connect the Ce NET connector and RCA PIN (yellow).
For detailed information, refer to the instruction manual of the TV TUNER.
60
VRX6570Rz