Clarion VRX6570Rz Owner's Manual page 33

Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is "OFF".
1. Press the ADJ button £ to switch to the ad-
justment selection display.
2. Operate the JOYSTICK § upward or down-
ward to select out of "TEL SW", "ON", "OFF",
and "MUTE", which are displayed in the menu
bar.
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When the setting is OFF, disconnect the cellu-
lar phone from the cable or turn off the power
of the cellular phone.
● ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car speak-
ers, you can adjust the volume by operating
the VOLUME button 2.
● MUTE:
The sound from this unit is muted during tele-
phone calls.
3. Operate the JOYSTICK § rightward or left-
ward to select a desired mode, and then press
the ENT at center of the JOYSTICK § to set
it.
4. Press the ADJ button £ again to return to
the STANDARD display.
Setting the car speaker output for
the cellular phone
∗ The factory default setting is "RIGHT".
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press the ADJ button £ to switch to the ad-
justment selection display.
2. Operate the JOYSTICK § upward or down-
ward to select "TEL SP". "LEFT" and "RIGHT"
are displayed in the menu bar.
● LEFT:
Telephone calls can be heard on the left
speaker connected to this unit.
● RIGHT:
Telephone calls can be heard on the right
speaker connected to this unit.
3. Operate the JOYSTICK § rightward or left-
ward to select a desired mode, and then press
the ENT at the center of the JOYSTICK § to
set it.
4. Press the ADJ button £ again to return to
the STANDARD display.
Other Functions
41
VRX6570Rz