Table of Contents
Advertisement
Chapter 7 Control Panel
7-12
Maintenance
Use the Maintenance screen to perform unit
system maintenance.
1
On the Control Panel, tap the [Advanced
Settings] key and then tap the
[Maintenance] key.
This displays the Maintenance screen.
The following describes the functions of the keys
on the screen.
Reboot
Restarts the unit.
USB mass
When the unit is connected to a
storage mode
computer, execute this option to
add, delete, or replace
navigation map data.
For details about map data
updates, visit the Clarion portal
site (my.clarion.com).
Recover RPM
Recovers the RPM database
database
when one of the error messages
below appears during
Application Manager execution.
• Installation or uninstall failed.
• A problem occurred in the
RPM database.
2
Tap the check box next to the item you want
to execute and then tap the [Execute] key.
Next, follow the instructions that appear on
the screen.
NOTE
• Do not execute a [Recover RPM database]
operation unless a problem requiring
execution has occurred.
• This USB client port is not used in this unit. It
will be used for future expansion.
116
NR1UB/NR1UW/NR1UR
7-13
Password
Use the Password setting to specify whether or
not input of a password is required when
starting up the unit.
1
On the Control Panel, tap the [Advanced
Settings] key and then tap the [Password]
key.
This displays the Password screen.
The following describes the functions of the keys
on the screen.
Use
ON: Require password input for unit
password
startup.
OFF: Password input not required
for unit startup.
Password
Inputs up to four characters for the
password you want to specify.
Confirm
Re-inputs the password you want to
Password
specify. (For confirmation)
Saves the settings and exits the
setting screen.
After you turn on the password feature, input of
the password will be required from the next time
you start up the unit.
Advertisement
Table of Contents
