Trane R410a Owner's Manual page 24

Error Error Description
codes
0x1E Outdoor temperature
sensor error
Remote not in
-
network range
Connect to network (if
- user did factory reset
on the remote)
AC switched OFF
-
(main power OFF)
Lock with AC
- Lock not installed
Night latch not
-
operating
- Door Open
Refer Section 2.3.1 for LED indications
24
Error Displayed on
Remote
Error 30: Outdoor
Temperature sensor
error -- Please Contact
Customer Care
NETWORK NOT FOUND
CONNECT TO NETWORK
SET POINT TEMP +
INFRARED ACTIVATED +
NO NETWORK FOUND
NIGHT LATCH FAILED
LOCK NOT INSTALLED
NIGHT LATCH FAILED
PLEASE CHECK YOUR
LOCK
NIGHT LATCH FAILED
DOOR OPEN
Unit Response
Cool mode or Dry
mode:
Unit will run with
Compressor OFF.
Fan mode:
Run IDU as per user
settings. "
Unit operates as per
previous settings.
Unit operates as per
previous settings
Action to be
Taken by user
Contact
Customer Care
Remote must be
in network range
Contact service
technician
Switch ON main
power/check the
plug
Lock is not in
network
Change Battery
of Lock or
Check Lock is
in Network by
doing Home/
Away Operations
Close door
48663967 Rev 1
Contents