Operation; Remote Operation; Manual And Auto Restart Operation - Trane R410a Owner's Manual

2. Operation

2.1. Remote Operation

Make sure power is ON
Select the room which needs to be controlled.
Refer section 2.4.2 for di erent functions of remote.

2.2. Manual and Auto Restart Operation

Manual operation can be used temporarily in case remote controller is not available.
Lift Front panel up to an angle, it stays attached with a clicking sound (Refer Figure - 2).
Do not lift front panel at an angle above 60 degrees. Do not apply too much force.
When you press manual control button (Figure - 3), the unit is switched on at the following default
conditions
MODE: COOL
Lower the front panel to its initial position.
Use object not more than 5mm in diameter to press manual control button.
To restore remote control operation, use remote control directly.
The Display LED status will not change when unit is operated through manual control button.
Auto Restart Function
Power cut during operation will stop the unit completely.
Unit starts automatically with all previous settings saved in memory function when the power is restored.
11
Figure - 2
FAN SPEED: MEDIUM
TSIXXMSXBSBCX Model Series
Manual control button
Figure - 3
SWING: AUTO SET TEMP: 24 °C
48663967 Rev 1
Contents