Hookup Diagrams; Quick Start - Mackie SRM350v2 User Manual

Active sound reinfocement speaker
Hide thumbs Also See for SRM350v2:
Table of Contents

Advertisement

HOOKUP DIAGRAMS
Quick Start
1. Start with the following settings on the back of the
SRM50v:
Turn the POWER switch off (down).
Set the CONTOUR and MIC/LINE switches out. If using
a microphone as the input to the SRM50v, push the
MIC/LINE switch in.
WARNING: Turn the LEVEL control
down (counterclockwise) before every
use. If not, you could be in for a star-
tling surprise, especially if the last time
you used it was with a microphone and
now you want to connect a line-level
source.
. Connect the output from your signal source (mixing
console, microphone, preamp, or other mic- or line-lev-
el source) directly to the INPUT connector on the back
of the SRM50v. This is a combination XLR and 1/"
TRS connector, and accepts balanced or unbalanced
line-level signals from mixers, preamplifiers, CD play-
ers, tape decks, etc., with the MIC/LINE switch out, and
accepts direct connections from dynamic microphones
with the MIC/LINE switch pushed in.
6
SIGNAL
LIMIT
NORMAL
+45
O O
+5dB
LEVEL
LINE
100Hz
12k/AIR
MIC
CONTOUR
POWER
(+3dB)
THRU
INPUT
Preamplifier
SRM350v2: STEREO OPERATION WITH A MIXER
. Connect the supplied AC power cord to the IEC socket
on the back of the SRM50v. Plug the other end into an
AC outlet properly configured with the correct voltage
for your particular model.
. Turn on your signal source. Make sure its Master Vol-
ume control (if it has one) is turned all the way down.
5. Turn on the SRM50v POWER switch.
6. Start the signal source, whether it be speaking into a
microphone or starting a CD player. Adjust any volume
controls on the signal source for normal operation.
7. Slowly turn up the LEVEL control on the back of the
SRM50v until the desired volume is reached (and the
LIMIT light does not come on). Always wear hearing
protectors if you are close when it is playing at high
levels.
8. If there is no sound, always turn down the SRM50v
LEVEL control before investigating. There may be a
mixer or preamplifier mute or tape switch engaged, or a
mic switch off.
SIGNAL
LIMIT
NORMAL
+45
O O
+5dB
LEVEL
LINE
100Hz
12k/AIR
MIC
CONTOUR
POWER
(+3dB)
Left
Line level
Output
Mixer or
1
2
3
4
5
7
9
11
6
8
10
12
THRU
INPUT
Right
Line level
Output
PREMIUM ANALOG MIXER
w/ PERKINS EQ & FIREWIRE OPTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents